Hi, I'm

Md Jahid Hasan Sagor

I am a Ph.D. candidate in Mechanical Engineering at the University of Maine, Orono. My research is in nanoscale heat transfer and computational modeling, and my wider experience covers CFD, thermal systems, HVAC, and mechanical design.

Current interests: heat transfer from the nanoscale to larger thermal systems, CFD, data-center cooling, HVAC, and mechanical design.

Two graphene sheets separated by a gap smaller than 10 nanometers, with heat crossing through electron, phonon, and photon channels
At the nanoscale, you cannot design reliable devices without knowing how much heat is transferred and which mechanism carries it.

About me

My work is in heat transfer and thermal engineering, using computational modeling across length scales. In my Ph.D., I use first-principles calculations and thermal-transport models to study nanoscale radiative heat transfer. I also have experience with CFD, thermodynamic analysis, large-scale numerical simulation, and mechanical design. In industry, I worked on HVAC and utility systems at a pharmaceutical manufacturing facility, where I operated chillers, boilers, AHUs, and the BMS, handled commissioning and troubleshooting, and led a 24-person operations team.

Education

Ph.D. in Mechanical Engineering
University of Maine, Orono, ME, USA — Sep 2021–May 2027 (expected) · GPA 3.86/4.00
Dissertation: Radiative Heat Transfer in the Quantum Regime
Advisor: Dr. Sheila Edalatpour
M.S. in Mechanical Engineering
University of Maine, Orono, ME, USA — Aug 2026 · GPA 3.86/4.00
B.Sc. in Mechanical Engineering
Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh — Dec 2018 · GPA 3.56/4.00
Advisor: Dr. Sumon Saha

Experience

Sep 2021 — present

Research Assistant (NSF-funded project)

University of Maine — Orono, ME, USA · Advisor: Dr. Sheila Edalatpour
  • Apply density functional theory (DFT) to calculate temperature-dependent electronic, phonon, and dielectric properties, including electron–phonon coupling, phonon effects, and anharmonicity.
  • Wrote From DFT to Dielectric Function: A Practical Guide for Engineers (PDF), a plain-language introduction to DFT for engineering students and researchers without a physics background.
  • Developed atomistic Green’s function (AGF) framework from scratch in code to quantify phonon thermal conductance in graphene.
  • Study nanoscale radiative heat transfer using temperature-dependent material properties obtained from first-principles calculations.
  • Showed that using room-temperature material properties can underpredict thermal conductance by 32–43% at 1200 K.
  • Used ab initio molecular dynamics (AIMD) to obtain temperature-dependent lattice dimensions and account for thermal expansion in material-property calculations.
  • Run large-scale simulations on HPC clusters and automate simulation workflows, data processing, and analysis using Python, MATLAB, and Bash.
  • Validated multiple calculated material properties against experimental measurements, demonstrating the robustness and reliability of the computational framework.
  • Published two first-author papers in Physical Review B with my advisor as the only coauthor, and presented the research at ASME IMECE.
  • Wrote and won a competitive Graduate Student Government research grant in 2026 to support the project.
Sep 2023 — May 2025

Teaching Assistant

University of Maine — Orono, ME, USA · Supervisors: Frank Dudish and Christopher Mordaunt
  • Taught undergraduate courses in Thermodynamics I & II (MEE 230, MEE 231) and Technical Physics I & II (PHY 107, PHY 108).
  • Graded homework assignments and exams and provided feedback to students.
  • Held office hours to help students understand course material and solve technical problems.
  • Supported students during physics laboratory sessions and assisted with laboratory equipment and troubleshooting.
Oct 2019 — Jun 2021

Executive Engineer, HVAC & Boiler Operations

Eskayef Pharmaceuticals Ltd. — Dhaka, Bangladesh · Supervisor: A.S.M Sayem
  • Managed the HVAC and steam utility systems for a GMP pharmaceutical plant, including a 600-ton Trane water-cooled chiller, 150-ton and 110-ton air-cooled chillers, AHUs, BMS, and three industrial boilers: 12 t/h Viessmann, 1.5 t/h Thermax dual-fuel, and 1.5 t/h exhaust-gas boiler, producing steam at 7–8 bar.
  • Commissioned a 600-ton York water-cooled chiller and the 12 t/h Viessmann boiler, covering specifications, procurement support, installation supervision, testing, and handover.
  • Maintained temperature, humidity, and differential-pressure setpoints in classified production areas through AHU and BMS operation, using trend data to identify and correct deviations.
  • Troubleshot chillers, AHUs, boilers, and associated refrigerant-side, water-side, and control-system issues, and coordinated with OEM vendors when additional support was required.
  • Designed a chemical dosing system for boiler feedwater treatment and prepared start-up, shutdown, operation, and maintenance SOPs used in GMP/FDA-regulated operations and audits.
  • Supervised a 24-person operations team consisting of 12 HVAC operators, 8 certified boiler operators, and 4 diploma engineers.
Jan — Aug 2019

Research Assistant, CFD & Heat Transfer Research Group

Bangladesh University of Engineering and Technology (BUET) · Supervisor: Dr. Sumon Saha
  • Performed CFD simulations of convective, conjugate, and natural/mixed convection heat transfer using the finite element method.
  • Solved the Navier–Stokes and energy equations to study velocity fields, temperature distributions, and overall heat-transfer performance.
  • Worked on cavity-based heat-transfer problems involving rotating cylinders, heat-generating bodies, nanofluids, and conjugate solid–fluid domains.
  • Performed mesh sensitivity studies, numerical verification, and CFD post-processing.
  • The work resulted in two Q1 journal papers and four conference papers, and I also mentored undergraduate researchers on CFD model setup, meshing, boundary conditions, and post-processing.
2018

Industrial Trainee

AST Beverage Ltd. — Shimrail, Narayanganj, Bangladesh  ·  Industrial Training Report (PDF)
  • Completed industrial training in plant utility systems, including gas and diesel generators, fire-tube boilers, water- and air-cooled chillers, cooling towers, CO₂ plants, and HP/LP air compressors.
  • Studied the operation and maintenance of industrial refrigeration and compressed-air systems, including chillers, cooling towers, and reciprocating compressors operating up to 40 bar.
  • Gained exposure to PET manufacturing and beverage production, including injection molding, continuous compression molding, bottle blowing, filling, labeling, and packaging.

References

“In our project evaluating phonon thermal transport mechanisms across two in-plane nanoribbons, Mr. Sagor was the lead contributor. He independently carried out all key components, including developing the simulation framework, performing all numerical calculations, and processing results.”
Dr. Sheila Edalatpour
Ph.D. Advisor · Libra Associate Professor of Mechanical Engineering, University of Maine
“His strong work ethic, attention to detail, and ability to master advanced thermal-fluid dynamics made him an invaluable member of my research team.”
Dr. Sumon Saha
Undergraduate Research Supervisor · Professor of Mechanical Engineering, BUET
“His ability to identify practical engineering solutions and improve system reliability made a positive impact on the plant’s performance and compliance.”
A.S.M Sayem
Deputy Manager, Engineering · Eskayef Pharmaceuticals Ltd.
“His knowledge and skill on HVAC, Chiller, Boiler & BMS will add value to any industry.”
Mohaimenul Islam Nahid
Sr. Assistant Engineering Manager · Eskayef Pharmaceuticals Ltd.

Full letters of recommendation are available on request.

Selected publications

M. J. H. Sagor and S. Edalatpour — Physical Review B, 114, 185425 (2026)
M. J. H. Sagor and S. Edalatpour — Physical Review B, 109, 235411 (2024)

Nine peer-reviewed publications in total, with 80 citations. See all publications

Skills

This list is only a summary. The work demonstrating these skills — papers, figures, code, and reports — is on the Research and Projects pages.

Thermal & fluids
Heat transfer, thermodynamics, fluid dynamics, CFD, refrigeration
HVAC & utilities
Water-cooled and air-cooled chillers (York, Trane), AHUs, BMS, fire-tube boilers, commissioning, performance testing
Nanoscale modeling
Density functional theory (DFT), atomistic Green's function (AGF) for phonons,ab initio molecular dynamics (AIMD), temperature-dependent dielectric response, and near-field radiative heat transfer
Modeling tools
Quantum ESPRESSO, Yambo, COMSOL Multiphysics, ANSYS Fluent
Programming
Python, MATLAB
Machine learning & AI
Scikit-learn, PyTorch, FastAPI, data preprocessing and EDA, classification, regression, deep learning, physics-informed neural networks (PINNs)
Visualization
Matplotlib, Gnuplot, VESTA, XCrySDen
Computational environment
Linux, Git, GitHub, HPC clusters, scripting and automation
Design & drafting
SolidWorks, AutoCAD

Honors & activities

Contact

I am open to research collaborations and engineering opportunities in computational heat transfer from the nanoscale to the macroscale, thermal systems, data-center cooling, and HVAC. You can reach me by email or through LinkedIn.